![]() They are on the cutting edge of radio technology and the radios are continuously improved through user feedback. Is an Apache Labs radio right for me? The Apache Labs software defined radios are built and designed for highly technical operators with a moderate amount of computer and networking experience - not appliance users. These values can be adjusted in the software. The RF output range for the ANT connector is (0-13W) and (0-300mW) for the TX Out connector. The ANAN-10E supports 2 receivers while the ANAN-10 supports 7 receivers The ANAN-10E is an ideal platform who want an entry level DDC/DUC SDR tranceiver, performance of the rig far exceeds most high end legacy radios. ![]() The ANAN-10E uses an EP3C25 FPGA while the ANAN-10 uses a larger EP3C40 3. The ANAN-10E uses a 14 bit ADC while the ANAN-10 uses a 16 bit ADC 2. Differences between the ANAN-10 & the ANAN-10E 1. Software-selectable 31dB input attenuator in 1dB steps Firmware can be updated via the Industry Standard TCP/IP network Ethernet connection. Mil style designs Supports 2 fully independent receivers (sharing the same antenna – and with suitable PC software, Each receiver can display 48/96/192/384 of spectrum) Blocking Dynamic Range (ARRL Method) no detectable gain compression below ADC overload Transmit and receive image rejection > 110dB Full duplex operation, any split over entire 160m to 6m range. Specifications & Highlights: Mosfet 10W Linear amplifier (160M-6M) gives 15-20W out on HF and 8-10W on 6M, 14 BIT LTC2208 ADC and an EP3C25 FPGA Custom build rugged Extruded Housing (same as the ANAN-10) note: no ventilation holes required in.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |